GKBM Greenpy MJ-S6013 Home Deco Fireproof Click Smoky Gray Stone
Composite SPC Flooring
Grey Stone Vinyl Flooring
Product:
Greenpy
Meigy 5.0T Series Wood Grain
Stone Plastic Composite SPC Flooring
New Environmentally Friendly Flooring
Specificattion:
Manufacturer: GKBM
Brand: Greenpy
Series: MEIGY Series
Decoration layer: smoky gray stone
Product Name: Stone Plastic Composite Flooring (SPC Flooring)
Normal size: 1220*183mm (7*48”), 304.8*609.6mm (12*24”)
Thickness: 4mm, 5mm, 5.5mm, 6mm
Wear Layer: 0.3mm, 0.4mm, 0.5mm, 0.55mm,0.6mm
IXPE mute mat: optional
IXPE thickness: 1 mm, 1.5mm, 2 mm
Formaldehyde: E0
Fireproof: B1
Antibacterial species: Staphylococcus, E.coli, fungi
Residual indentation: 0.15-0.4mm
Heat Stability
Dimensional change rate: ≤0.25%,
Heating warpage: ≤2.0mm,
Cold and hot warpage: ≤2.0mm
Seam Strength: ≥1.5KN/M
Warranty: 20-30 Years
Packing: Carton
Single pack: 1238*195*55mm
13 pcs/carton; 2.9m2/carton.
Application: home, school, kindergarten, dormitory, postpartum care center,
office, hotel, gym, hospital, library, shopping mall, store,
dancing room,
training room, exhibition hall, fitness room, drawing room,
basement,
Eco-Industrial zone, etc.
Keywords:
SPC flooring
Stone SPC Flooring
Stone Grain SPC Floor
Composite SPC Flooring
SPC Floor stone
Gray spc flooring
spc flooring gray
Smoky gray stone Floor
Smoky gray stone SPC Flooring
Waterproof spc flooring
Spc waterproof flooring
Spc fireproof flooring
Environment friendly flooring
eco-friendly flooring
SPC vinyl flooring
SPC vinyl floor
SPC rigid flooring
SPC rigid floor
Stone plastic composite floor
Click SPC floorings
SPC Click flooring
E0 Formaldehyde flooring
Zero formaldehyde flooring
Stone vinyl flooring
Stone vinyl plank flooring
luxury vinyl laminate flooring
grey stone vinyl flooring
marble vinyl flooring
Bottom of SPC Flooring
Advantages
Installation
Note:
If you need 90° herringbone splicing method, please contact the
factory for OEM service and MOQ.
Installation Methods:
90° subway style, 90° herringbone, 90° random
45° subway style, 45° herringbone, 45° random
Installation Notes:
1.The temperature should be kept between 10-30 °C;
The humidity should be kept within 40%.
Place SPC floors at a constant temperature for 24 hours before
paving.
2. Basic ground requirements:
(1) The height difference within the 2m level shall not exceed 3mm,
otherwise self-leveling cement construction is required to level
the ground.
(2) If the ground is damaged, the width should not exceed 20cm and
the depth should not exceed 5m, otherwise it needs to be filled.
(3) If there are protrusions on the ground, it must be smoothed
with sandpaper or leveled with a ground leveler.
3. It is recommended to lay a silent pad (moisture-proof film,
mulch film) with a thickness of less than 2mm first.
4. A minimum 10mm expansion joint must be reserved between the
floor and the wall.
5. The maximum length of horizontal and vertical connection must be
less than 10m, otherwise it must be cut off.
6. During the installation process, do not use a hammer to forcibly
hit the floor to prevent damage to the floor slot (groove).
7. It is not recommended to install and lay it in places such as
bathrooms and toilets that are soaked in water for a long time.
8. It is not recommended to lay in outdoor, open-air balcony sun
room and other environments.
9. It is not recommended to lay it in places that are not used or
inhabited for a long time.
Ordering Info
| Item | Code | Description |
| Model | MJ-S6013 | |
| Size | A | 183*1220mm (7*48“) |
| B | 304.8*609.6mm (12*24“) |
| C | customized size |
| Thickness | 40 | 4mm |
| 50 | 5mm |
| 55 | 5.5mm |
| 60 | 6mm |
| Wear Layer | TH: | 0.3mm |
| FR | 0.4mm |
| FV: | 0.5mm |
| FF: | 0.55mm |
| SX: | 0.6mm |
| IXPE (optional) | N | Without |
| W | With |
| IXPE Thickness | 10 | 1mm |
| 15 | 1.5mm |
| 20 | 2mm |
Contact
Xi'an Gaoke Building Material Technology Co., Ltd.
Address: No. 19, Keji 1st Road, Xi'an High-tech Industrial
Development Zone
Phone: 029-88316613 Fax: 029-88311243
Contact person: Ms. Zhang: +86 15829290083;
